posted by admin on Jan 21
Preventing Truck Theft: What You Can Do
Every year, hundreds of air brake lock systems are rendered useless and proven ineffective by thieves. In 2005 for example, the Federal Bureau of Investigation estimated that around $12 to $20 billion worth of cargo and equipment are stolen every year in the country. And with expensive goods (electronics, cards, etc.) being transported on the road everyday and trucks becoming increasingly pricier, thieves that target trucks and tractors are not bound to slow down anytime soon. The only solution is to take preventive measures to protect your investment and cargo. Here are some basic tips you can follow to ensure you won t fall prey to the many truck thieves that lurk around the parking lot: Never leave your key inside the ignition. You might be in dire need to use the bathroom, but believe me when I tell you that the few seconds it will take to remove the key and put it in your pocket is worth the discomfort. Take extra precautions before you travel by finding out which places along your route have high crime rates. Avoid these areas if you can, but if passing through them is an absolute imperative, then jus be doubly careful than you would normally be. Take alternative routes once in a while. This prevents thieves from being able to map out your routine and plan a robbery attack against you. When stopping for a meal, park your truck in a spot visible and accessible from where you will be sitting. It s also best if you choose where you take your breaks and avoid stopping in restaurants or stations with a questionable reputation. Don t leave a running tractor unattended. Doing this is like giving crooks an open invitation to rob you and drive away with your vehicle. Make it harder for thieves to steal your truck by putting protective bars on the passenger side window, the side that, according to reports, most thieves enter the vehicle from. Install a reliable security system to protect your car. There are many vehicle protection devices available on the market today. One of the most affordable and effective car protection devices today is the air lock security system. The security device prevents theft by blocking an air line from the air brakes. This means unless the truck driver deactivates the system, the vehicle will not move and your investment and cargo will remains safe. Yes, you may have installed tracking device in your truck to let you know where it is at all times and you may fully trust the policemen in your town/city, but remember that an ounce of prevention is always better that a pound of cure. Take these safety precautions and keep your truck (and investment) safe. Visit this site for more information on air brake lock systems . you may have installed tracking device in your truck to let you know where it is at all times and you may fully trust the policemen in your town/city, but remember that an ounce of prevention is always better that a pound of cure. Take these safety precautions and keep your truck (and investment) safe. Visit this site for more information on <a href=http://www.airbrakesecurity.com/index.html> air brake lock systems </a>.
Source: www.ArticlePros.com
Tips on How to Save Gas
Fuel economy-maximizing behaviors or more popularly known as gas saving tips have been at the forefront of most drivers’ concerns thanks to the looming oil crisis. Basically, it is defined as a set of methods that drivers can utilize, in order to optimize their automobile’s fuel economy. There are many ways that energy is spent needlessly through driving. These include inefficient engine use, aerodynamic drag, friction, excessive braking, and many more. However, there are two general categories on how to save gas, which can be either basic or advanced. The former can be done by most drivers with little or no professional help, while the latter ought to be done by an experienced hypermiler. Basic Techniques The first thing that every driver should do in order to improve gas mileage is to inflate the tires to the maximum. This way, a smaller amount of energy is needed to move the automobile. In line with this, there should be minimum cargo as much as possible to remove the burden off the engine. Additionally, maintaining optimum speed should help significantly, which is usually measured in the 35 to 55 mph range. Aside from that, the driver should also pay attention to braking and acceleration. That means braking and acceleration should not be sudden and they should be minimized as much as possible. Another way to save gas is through coasting. That means the engine is still running, although the transmission is set to neutral. Bear in mind that fuel is still consumed when coasting, although far less than the driver would in normal driving conditions. These basic techniques are recommended for the average user and these are also far simpler to execute as opposed to the advanced techniques that are discussed below. Advanced Pulse and glide is one of the most commonly used fuel saving tips by the advanced hypermiler. This method consists of driving to a certain speed limit called pulsing, which is then followed by a period of gliding. These two steps are repeated in order to maximize fuel economy. However, it is advised that the gliding stage should be done when the engine is not activated. Another sophisticated fuel saving tip is called drafting, which is otherwise known as slipstreaming. This technique involves two or more vehicles that are aligned in a close group, in order to decrease the overall effect of drag. This happens because the lead vehicle’s slipstream is utilized by the ones that follow it. Drafting is an effective way to increase gas mileage both for the lead and tail automobiles. Most hypermilers use this method when trailing larger vehicles and has was shown to increase Miles Per Gallon(MPG) efficiency by at least 11 percent. Overall, it is imperative for each driver to learn different ways on saving gas without having to spend on another part or accessory to accomplish it. However, enough caution ought to be considered whenever these techniques are used to prevent accidents or costly engine damage.
Source: www.ArticlePros.com
Defensive Driving Tips On Vehicle Lane Changes
Lane changes can be one of the easiest maneuvers with a vehicle, and can be one of the hardest maneuvers at the same time. Changing lanes requires processing information and making a safe decision well in advance to make the maneuver a simple and safe task. The faster your speed is, the faster you have to process information, which in turn makes it a little more difficult. There are important defensive driving procedures you must do, before making a lane change. Look ahead and plan ahead. If you plan well in advance, the maneuver becomes a lot easier and safer. Checking your path ahead before you consider changing lanes is the number one priority. What traffic and pedestrians are doing ahead of you is the first step in processing information and making a decision. You must always check your path ahead for vehicle traffic changes, and controlled intersections that affect these changes. There are many potential hazards that you should be looking for. You have to be looking ahead for vehicles slowing down and possibly stopping in front of you, and making sure you?re on the look out for pedestrians that may step off the curb up ahead. Also checking for vehicles that may possibly come out in front of you, or from another merging lane. A good indication of what traffic and pedestrians are going to do ahead of you would be motorist signaling ahead of you with a signal and or brake lights. If their signaling to turn, they have to slow down and possibly stop for other traffic or pedestrians, depending on circumstances where they are turning. All this information is important, because it affects everybody in motion. While your checking your path ahead, you have to know what is happening behind you. If you use your rearview mirror all the time, you will always know what is happening around you. Using the rearview mirror, gives you a bigger picture than your side mirrors. Checking your rearview mirror should be done at a glance only. Your main concern is in front of you. When glancing at your rearview mirror, you should be glancing for traffic coming up faster than you, also vehicles signaling to change lanes behind you. They may be picking up speed to pass your vehicle. In order to make a safe lane change, you have to either slow down to let traffic get by you, or speed up to stay ahead of traffic, without going over the speed limit. If you?re doing the same speed as traffic behind you, they won?t catch up to you, unless you start braking. If traffic is doing the same speed, you should accelerate slightly to maneuver over to the other lane, unless there is a good reason not to. Once you know what is happening both ahead of you and behind your vehicle. The number three procedure is signaling to let traffic know your intentions on the direction you plan on maneuvering. The signaling procedure is for communicating to other drivers. If you signal and let other drivers know what you?re doing, they may slow down to let you make the safe lane change. Warning other vehicles of your intention to change lanes, include vehicles ahead of you and behind you. Drivers negotiating to maneuver out in front of you may stay where they are, if they see your signal to move over, possibly into the lane that they want to maneuver into. People do not always do what there suppose to do, so anticipate the worst. Take nothing for granted! It may be a safer lane change beyond traffic waiting to come out, if you have time. You also have to consider not surprising the vehicles close to your vehicle by signaling as they approach the corner side of your vehicle. They may panic and brake, thinking you?re moving over sooner. Wait until they are beside your vehicle and your signal is out of their sight before you signal to warn other traffic behind your vehicle. This seems like a lot of info for just a signal, but communicating with other drivers are important in defensive driving. After you have signaled and you know everything is clear ahead of you and behind. Take a quick glance over to your blind spot, and make sure there is nobody sitting along side your vehicle. Stay in your lane, if it is not safe. When you check your shoulder, it?s only supposed to be a glance. You still have one more important procedure before maneuvering into the other lane. Recheck the lane ahead of you, just before you turn the steering wheel to make sure nobody is stopping or coming out into your path. Once you have glanced over your shoulder and looked forward, gradually maneuver over right away with a slight adjustment of the steering wheel. Only if it?s safe! You do not want to be maneuvering over, if there is a vehicle stopping in front of you, or coming out in front of your intended path. If you cannot make the maneuver right after the shoulder check, cancel everything and start over. The worst scenario would be traveling an extra block in town. Do not make lane changes at intersections. Make sure lane changes are done before and after intersections. Intersections include any crossroad, side road, lane or street. Constantly planning well in advance and constantly using your mirrors, will help you become a better defensive driver. I hope these defensive driving tips help your goal in becoming a safe driver. For more information on this topic, please consult with a family member and a recognized Driving School on defensive driving techniques. Owned and operated a Driving School for several years. Taught over 2000 kids and adults how to drive. Now operating a Discount Tee Time site at <a href="http://www.golfanchor.net" title="http://www.golfanchor.net" target="_blank">http://www.golfanchor.net</a> and a golf site at <a href="http://www.golfanchor.com" title="http://www.golfanchor.com" target="_blank">http://www.golfanchor.com</a>
Source: www.ArticlePros.com
