posted by admin on Aug 1
Automotive Undercoating by Rust Bullet
Automobiles are beautiful but with time and as your car is exposed to the atrocities of nature like blazing heat, rain, UV rays etc., wear and tear occurs,. All cars require proper maintenance if you want your car to have a long life. Rust is also a major maintenance problem. Car Rust Paint and Automobile undercoating are solutions to car rust problems.Generally, the lower body of an automobile is more prone to rusting then the upper body and therefore requires special treatment like automotive undercoating. The requirement becomes a necessity if you have invested in a vintage automobile as your investment is at stake. But for this very important need, there are very few options of automobile undercoating available in the market. Rust Bullet provides a very effective solution to this automobile undercoating problem for protection from rust. Rust Bullet- Kills the rust!Rust Bullet, is a one step Urethane based patented product that penetrates rust and dehydrates it and seals the area with an armor tuff tough coating. Rust Bullet Automotive can be used as an automotive paint as well as an automotive undercoating. The paint is metallic grey in color and it takes approximately 3 Quarts to do an under carriage with two coats. Rust Bullet automotive is different than the Rust Bullet industrial formula; it is thinner and has more metal so as to give a smoother paintable finish to your car.Advantages of using Rust Bullet Automotive It requires very little prior surface preparation It can be applied directly to the rusty metal surface It has superior adhesion properties It is very easy to apply and maintain It is UV resistantApplication of Rust Bullet Automotive Rust Bullet Automotive can be applied to your car with the help of an HVLP spray system with a 1.3 to 1.5 tip at 40 PSI, at about 2 Mils per coat. For a 10 year warranty a dry film thickness of 6 mils is required. After applying three coats 24-48 hrs later you can apply a top coat with a color of your choice. It is advisable to run Xylene or acetone through the lines of your equipment before & after spraying the first coat of Rust Bullet, to avoid any damage to the equipment. Rust Bullet solves the rust problem with its easy and simple process. Visit the site www.rustbullet.com and try this unique product. David is a well known author who writes for www.rustbullet.com
Source: www.ArticlePros.com
5 steps to sell a Japanese used vehicle
Japanese cars are renowned for their quality. Some of the top used Japanese cars for sale are Toyota, Nissan, Honda, Mazda, Mitsubishi, Fuji Heavy Industries (Subaru), Suzuki and Daihatsu. Many surveys have shown that most buyers shop online in purchasing their next used car. In this article we will discuss five key points on selling your car online.1. Surf the webThe internet has many choices on finding the right site to advertise your vehicle. Choose a website that is popular and has a high ranking. Do choose a site that specializes in your make and model. Select a site that will continuously show case your ad. And last but not least find a site that is reasonable in fees.2. Your adUsing correct and distinct terms to describe your car will make your ad concise. This will attract the buyer to further reading your ad. Use key phrases and solid facts. State the year, make, model, milage, and maintenance records. Mention any non-standard added features and improvements. And also be precise about the price you expect and contact details. 3. Quality Photo sDo photograph your car in sunlight. Take different angle view shots of your car. Make sure before you photograph your car, that it is clean and washed from inside and out. Take pictures of the inside interior and any special features like tires or hub-cabs. Do have a flattering backdrop for your car when taking the pictures. 4. Inquires Be prepared to answer questions, always keep a standard and basic list about your car on hand, near the phone and computer. Also make sure you can give out online resources to the buyer on your car. Choose specific times and dates for car viewing and showing. If dealing with people outside your area, make sure the buyer knows it s their responsibility to pick up or make arrangements on getting the car. 5. Protecting your investment and selfNever hand over your vehicle till you are paid in full. Verify the buyer s information to make sure your not getting scammed. Find you out which method of payment is safest. Always protect your privacy, never give out more than you have to. If you are in habit of changing to new models as brand new then I would highly recommend Japanese Makers. For more than two decades the impression of lesser safety in Japanese brands have been shifted to equally same standards as its German or American counterparts.With these tips, you will hopefully find your self on the right track to selling your vehicle online. http://www.nexusscars.com
Source: www.ArticlePros.com
The scoop on carbon fiber hoods
Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?There are a few reasons that carbon fiber has taken off in the past few years. It is a lightweight, rigid, visually appealing material. It has a unique textured look and a smooth finish. It is surprisingly strong, and doesn’t flex much.Take carbon fiber hoods for example. A lot of tuners like to add a carbon fiber hood on their cars. Opposed to the steel factory hoods, these carbon fiber hoods can reduce the weight of the vehicle by as much as 40 or 50 pounds on some applications. This modification, when added to other weight reducing modifications, can slightly decrease 0-60 times and marginally improves handling and acceleration.The other reason is the cool textured looking finish. Add a few carbon fiber touches as a theme throughout the vehicle and this can score some major style points.These carbon fiber hoods are fairly expensive for their weight reducing capabilities, but add a lot of style for the money. Browse through our website to find a carbon fiber hood for your car at www.majesticmodifications.com. Once you have purchased the hood you want, it’s time to get it installed. You may need a hand removing the factory hood due to its weight, but once it is removed, you should be able to handle the much lighter carbon fiber hood. The installation is fairly easy, so here is a quick guide to help you get it installed.Start your installation by removing the windshield washer jets for the factory hood. Disconnect the tubing that runs to them by unclipping or unscrewing them. If there is a light attached to the hood, go ahead and remove it, as you may want to reuse it on the new hood.With these removed, and with some help on the other side, prop the hood up with the hood prop if applicable. Remove the 4 bolts holding the hood to the hinges. If your hood has gas shocks, remove them before removing the hinge bolts. Be careful to support the weight of the hood when removing the hinge bolts to reduce the risk of damaging the fenders or the windshield. With the hinges and gas shocks unbolted, this will free up the heavy factory hood. Carefully remove it from the hinges by pulling it away from the windshield and set it aside.Set the new carbon fiber hood in place. It will be significantly lighter than the factory steel hood. Line up the bolts on the hinges and tighten them down. Reattach the gas shocks if applicable, or set the hood prop in place. Reattach your windshield washer jets if your hood permits, and run the lines on the underside. If you saved your light and want to reattach it, you can do so at this point. it can be attached using some 3M adhesive double sided tape, or you can carefully screw it in place, making sure to use screws small enough to not penetrate the top of the hood. Close the hood and check for alignment. If you need to adjust the alignment, lift the hood and loosen the hinge bolts slightly, just to where you can make small adjustments. Lower the hood and make any adjustments and re-tighten the bolts. This should complete your carbon fiber hood installation.If you need any support or advice for your carbon fiber hood installation, you can contact Majestic Modifications by emailing us at support@majesticmodifications.com. <a href="http://www.majesticmodifications.com">Majestic Modifications</a> is the complete car customization concept, specializing in air intakes and performace upgrades, body kits and <a href="http://www.carbon-fiber-hoods.blogspot.com">carbon fiber hoods</a>, glow gauges and interior accessories, wheels and tires, mobile video and elctronics.
Source: www.ArticlePros.com
