posted by admin on Jun 23
The scoop on carbon fiber hoods
Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?Carbon Fiber seems to be the material of choice for aftermarket accessories. Now you can find carbon fiber mirrors, dash trim kits, hoods, fenders, and who knows what else. So what is the big deal with carbon fiber?There are a few reasons that carbon fiber has taken off in the past few years. It is a lightweight, rigid, visually appealing material. It has a unique textured look and a smooth finish. It is surprisingly strong, and doesn’t flex much.Take carbon fiber hoods for example. A lot of tuners like to add a carbon fiber hood on their cars. Opposed to the steel factory hoods, these carbon fiber hoods can reduce the weight of the vehicle by as much as 40 or 50 pounds on some applications. This modification, when added to other weight reducing modifications, can slightly decrease 0-60 times and marginally improves handling and acceleration.The other reason is the cool textured looking finish. Add a few carbon fiber touches as a theme throughout the vehicle and this can score some major style points.These carbon fiber hoods are fairly expensive for their weight reducing capabilities, but add a lot of style for the money. Browse through our website to find a carbon fiber hood for your car at www.majesticmodifications.com. Once you have purchased the hood you want, it’s time to get it installed. You may need a hand removing the factory hood due to its weight, but once it is removed, you should be able to handle the much lighter carbon fiber hood. The installation is fairly easy, so here is a quick guide to help you get it installed.Start your installation by removing the windshield washer jets for the factory hood. Disconnect the tubing that runs to them by unclipping or unscrewing them. If there is a light attached to the hood, go ahead and remove it, as you may want to reuse it on the new hood.With these removed, and with some help on the other side, prop the hood up with the hood prop if applicable. Remove the 4 bolts holding the hood to the hinges. If your hood has gas shocks, remove them before removing the hinge bolts. Be careful to support the weight of the hood when removing the hinge bolts to reduce the risk of damaging the fenders or the windshield. With the hinges and gas shocks unbolted, this will free up the heavy factory hood. Carefully remove it from the hinges by pulling it away from the windshield and set it aside.Set the new carbon fiber hood in place. It will be significantly lighter than the factory steel hood. Line up the bolts on the hinges and tighten them down. Reattach the gas shocks if applicable, or set the hood prop in place. Reattach your windshield washer jets if your hood permits, and run the lines on the underside. If you saved your light and want to reattach it, you can do so at this point. it can be attached using some 3M adhesive double sided tape, or you can carefully screw it in place, making sure to use screws small enough to not penetrate the top of the hood. Close the hood and check for alignment. If you need to adjust the alignment, lift the hood and loosen the hinge bolts slightly, just to where you can make small adjustments. Lower the hood and make any adjustments and re-tighten the bolts. This should complete your carbon fiber hood installation.If you need any support or advice for your carbon fiber hood installation, you can contact Majestic Modifications by emailing us at support@majesticmodifications.com. <a href="http://www.majesticmodifications.com">Majestic Modifications</a> is the complete car customization concept, specializing in air intakes and performace upgrades, body kits and <a href="http://www.carbon-fiber-hoods.blogspot.com">carbon fiber hoods</a>, glow gauges and interior accessories, wheels and tires, mobile video and elctronics.
Source: www.ArticlePros.com
Installing Aftermarket Head Units
Are you thinking about installing your own car stereo head unit? Be sure to read this article and figure out what you will need to do to get it done. Upgrading the sound system is usually one of the first modifications attempted when we talk about car customization. The best place to start is with a good head unit. If you plan to install it yourself, read on for some technical tips from our experience installers. You will need a few tools to do the job right, so start by collecting some screwdrivers (flat head and phillips head), a socket set, wire cutters, wire splitters, butt connectors or heat shrinking sleeves, electrical tape, zip ties, solder and a soldering iron, and some patience. The first thing I would do before installing I would suggest buying the stereo wiring harness for your vehicle application. This will make the installation easier for you if you are a beginner, and it allows for easier replacement of the stock radio (if you choose to sell the vehicle in the future) and swapping or upgrading to a different aftermarket head unit. Begin by disconnecting the negative battery cable from the battery. This will ensure that you don’t accidentally cross any wires and burn out a new piece of equipment. Next, remove the old head unit. If you need to see how this is done on your specific vehicle, you can look up your vehicles application on installdr.com. This is a great resource for seeing pictures of how to remove the head unit. Once it is loose, disconnect the wiring harness and the antenna from the head unit and remove it completely. There are two types of wiring harnesses you can get. There is the universal wiring harness that connects to your vehicles existing wiring harness, and has the unfinished wire ends that connect to the color coded wires of your new head unit. There is also a wiring harness that has a harness on both ends, and just clicks in place on both sides. These are the easiest to install, but can be harder ot find to match your vehicle to the head unit. Most wiring harnesses are the universal type, so we will focus on those. If you have obtained the wiring harness, you will notice the color coded wires in the back of the head unit. The wires on the head unit and wiring harness should match. The head unit wires and the wiring harness wires will be partially spliced for easy installation. There are several good ways to connect the wires. One way is to use butt connectors, which crimp the wires within a connector. These can be picked up almost anywhere that sells/installs head units, or at Walmart, etc. My favorite way requires a soldering iron and heat shrinking sleeves. Twist the wires together tightly. Apply just enough solder to weld the two wires together. Now fold them over parallel to one of the wires. Slide the sleeve over the connection and heat it with a heat gun or good hair dryer. I have had to rewire or repair systems where butt connectors were used, but this could be installer error, and not a problem with the connectors themselves. I have never had any of the soldered connections fail. Once all the connections are made, and the sleeves heated and shrunk in place, I like to take a zip tie and tie them all together. Clip the excess zip tie for a clean finished look. Connect the wiring harness of the head unit to the wiring harness connected to the vehicle. Plug in the antenna (you may find you need an antenna adapter in some applications). Now slide the head unit in place, but don’t attach it yet. Reconnect the negative battery cable and turn on the head unit (make sure the key is turned to the ACC position). It should be functioning properly at this point. If you plan on adding an amp, or have purchased one for this setup, turn the unit off and connect the RCA cables. Run them through the dash to the floorboard and to the amp (more on how to successfully do this in future articles). If you encounter problems, you can email <A HREF="mailto:support@majesticmodifications.com">support@majesticmodifications.com</A> for help. Brought to you by <A HREF="http://www.majesticmodifications.com" TARGET="_blank">http://www.majesticmodifications.com</A>. Majestic Modifications is your online source for auto parts and accessories, installations advice and technical support.
Source: www.ArticlePros.com
